This summer is the “Summer of Shirts” in the Teen MakerSpace at The Public Library of Mount Vernon and Knox County (OH). Every Monday we are teaching our teens a different way that we can make or modify t-shirts. So far we have done Sharpie Tie-Dye, puffy paint, and low-tech screen printing. Last Monday we taught our teens how to create t-shirts using hot glue guns and spray paint and it turned out quite spectacularly, if I’m being honest.

The basic premise: You will make a negative stencil using a hot glue gun and then spray paint over it so that when it is removed you will have a fantastic (and original!) t-shirt design.

Supplies Needed:

• T-shirts or tote bags (plain)
• Hot glue gun with plenty of glue sticks
• Parchment paper
• Fabric spray paint (you can buy fabric spray paint or make your own using these instructions: Make Your Own Fabric Spray Paint | My Crazy Blessed Life!)
• A piece of cardboard to put in between the two layers of your t-shirt
• Something to keep your work space safe, like a plastic table cloth

Not Needed but Helpful

• A computer with a printer
• Sharpies and other embellishments

Making Your Shirts

Step 1: Creating Your Hot Glue Stencil Pieces

First you want to create a design on a piece of paper to be the template for your stencil. You can freehand this if you have the skill, or simply print something off on a piece of paper using your computer. Simple text and graphics work best. For example, silhouettes and big block letters are ideal.

After you have your design on paper, lay a piece of parchment paper over top of it. You will then trace it using the hot glue gun to create your hot glue pieces. Allow them to dry fully before you peel them off the parchment paper. Patience will be an important part of this process throughout as there is a lot of no really, let things fully dry before going on to the next step.

Step 2: Setting Up for Painting

You will then want to start setting up your shirt for painting. Be sure and put your piece of cardboard in between the two layers of your shirt and to cover your work space with your plastic table cloth to help with any over spray. You’ll also want to spray outside (on grass is recommended) or in a well ventilated space like a garage with an open door.

Gently peel your hot glue pieces off of the parchment paper and position them onto your shirt. When you spray paint the shirt, the hot glue pieces will prevent the paint from getting on the space it is covering.

Step 3: Painting

You will want to carefully spray paint your t-shirt. If you let colors dry in between coats you can overlay colors and create amazing effects. The trick is to apply gentle pressure, light coats, and to be patient.

After you finish painting your t-shirt, it will look something like this:

Above is a cat themed t-shirt made by one of our teens. You can see the places that are covered by the hot glue stencil pieces. She made a template using a silhouette image, printed it, made her hot glue stencil pieces and painted in multiple layers. You then want to make sure and let your paint FULLY DRY. If you try and remove your hot glue stencil pieces you may smudge the surrounding paint. Again, patience is called for. It’s a theme.

Step 4: Finishing Touches

After your t-shirt is fully dry, you can add embellishments if you like. We found that t-shirts made with text on them kind of popped better if you outlined the text using a Sharpie marker, for example. Or you could use puffy paint to add some dimensionality.

Our Gallery

Stencils can be re-used. The stencil used to make the t-shirt above was also used to make the tote bag below.

One of our teens cut the neckline out of a t-shirt to make a different type of design and we painted the neck cut-out to make it into a bib for one of the TMS Assistant’s baby. I love this bib so much.

Final Thoughts

All in all we had about 20 teens participated and they really enjoyed the activity and made some great t-shirts. To do a complete t-shirt from beginning to end took as little as an hour. The fabric spray paint was moderately expensive and didn’t go as far as we thought it would. In fact, we ran out half way through our night and I ran to the store to get more. We did this as a drop-in activity over a six hour period and this really worked well as we could provide more one-on-one instructions.

Filed under: Makerspace